Precision matters when it comes to ductwork and HVAC components. Standard, mass-produced parts often don’t deliver the level of efficiency or fit that a home or business truly needs. Gaps, poor connections, and airflow restrictions lead to wasted energy, inconsistent temperatures, and strain on your heating and cooling equipment.
We at D.T.M. Heating And Air Conditioning provide custom sheet metal fabrication in Keller, TX because no two properties are exactly alike. Whether you’re replacing a system, building from scratch, or upgrading for better performance, custom metalwork ensures your HVAC system fits your space like a glove—and works smarter because of it.
Why Sheet Metal Fabrication Makes a Big Difference
Every bend, curve, and seam matters in ductwork. Even the smallest imperfection or ill-fitting joint can reduce airflow, increase energy usage, and cause your HVAC system to wear out prematurely. That’s why our approach to sheet metal fabrication isn’t about shortcuts or guesswork—it’s about precision.
Our in-house sheet metal capabilities allow us to fabricate ductwork and fittings tailored specifically for your HVAC layout. No more compromising with one-size-fits-all parts. We’re able to deliver solutions that maximize airflow, reduce leakage, and create a more efficient, longer-lasting system overall.
What does this mean for you? Lower energy bills, better indoor comfort, and an HVAC system that’s built to last.
free new install estimates
Serving Keller, TX with Pride and Precision
Keller isn’t just another place we serve—it’s part of our community. Homeowners and businesses in this area experience a wide range of temperatures and seasons, meaning your HVAC system needs to operate at peak performance year-round. We understand the architecture, the climate, and what it takes to make an HVAC system work efficiently here.
Whether your home was built recently or you’re dealing with legacy ductwork in an older building, we have the tools and experience to design and fabricate custom sheet metal components that work with your space, not against it. Our team is dedicated to getting every detail right because that’s what it takes to deliver dependable comfort and performance in Keller.
Built Better: How Our Custom Fabrication Stands Out
Choosing D.T.M. Heating And Air Conditioning means choosing professionals who care about doing the job right the first time. Our team brings deep experience and an unwavering commitment to quality in every sheet metal project.
Here’s what gives us an edge:
1. Fully In-House Fabrication
Everything is crafted right here in our shop, using top-grade materials and advanced equipment. That gives us complete control over quality and turnaround time. We don’t rely on third-party shops, which means fewer delays and more accountability.
2. Custom-Tailored for Performance
We don’t use guesswork when building ductwork. Each component is sized, shaped, and assembled based on the specific needs of your HVAC system and space. That leads to a tighter fit, less leakage, and better energy efficiency overall.
3. Local Knowledge, Trusted Craftsmanship
We’ve worked in Keller long enough to know that homes and businesses here come with their own unique challenges. Whether you need tighter clearances, unusual transitions, or specialty fittings, we’ve seen it—and we know how to make it work.
What to Expect from Our Sheet Metal Services
Every sheet metal fabrication project starts with a close look at your space and system. From there, our team gets to work designing and crafting pieces that enhance performance, fit securely, and support long-term reliability.
Here’s what our process typically includes:
- System assessment – We measure, inspect, and understand the full layout before fabrication begins.
- Custom design – Ductwork and fittings are planned based on the physical constraints and airflow demands of your space.
- Precision fabrication – Using modern tools, our team cuts and assembles every component with careful attention to detail.
- Seamless integration – Once fabricated, your components are installed with a focus on sealing, alignment, and performance optimization.
We don’t believe in “good enough.” Every joint, bend, and seam is fabricated with purpose, tested thoroughly, and installed with pride.
Perfect for New Installs, Retrofits, or Upgrades
Custom sheet metal fabrication isn’t just for big commercial projects. Many residential systems benefit significantly from a tailored approach—especially during equipment upgrades, remodels, or when existing ductwork isn’t doing the job it should.
Even newer homes can suffer from poorly sized or loosely installed ductwork. If you’ve noticed uneven airflow, noisy vents, or rising energy bills, custom ductwork may be a game-changer.
Our services are ideal for:
- New construction homes needing full HVAC layout and ducting
- System replacements that require updated fittings and transitions
- Retrofits where older ductwork no longer supports modern equipment
Energy efficiency upgrades for homeowners wanting lower bills
Why Keller Homeowners Choose Us
Clients in Keller trust us because we take the time to understand your needs and never settle for one-size-fits-all solutions. From the first consultation to final installation, we make sure everything lines up—literally and figuratively.
Our reputation is built on honest work, clean results, and systems that stand up to the Texas heat and winter chill. Whether you’re a homeowner looking to improve comfort or a business owner who needs reliable performance, our sheet metal fabrication is built around your goals.
FAQs About Sheet Metal Fabrication
How do I know if I need custom ductwork or standard components?
If your existing system has airflow issues, odd temperature differences between rooms, or was pieced together with generic fittings, custom fabrication can help fix those issues. During a consultation, our team can evaluate your system and provide recommendations.
Is custom fabrication more expensive than pre-made parts?
While there may be a slightly higher upfront cost, the long-term savings from increased efficiency and better performance often outweigh the initial investment. Plus, you get a more reliable and tailored system.
What types of materials do you use for sheet metal fabrication?
We use high-quality galvanized steel and aluminum, depending on the project’s needs. These materials offer durability, resistance to corrosion, and excellent performance over time.
Let’s Build Something Better Together
If you’re dealing with airflow issues, considering a system upgrade, or building something new, don’t leave the details to chance. Custom sheet metal fabrication could be the key to maximizing your HVAC investment and creating lasting indoor comfort.
Let’s talk about your project. Book online, or give us a call.
We at D.T.M. Heating And Air Conditioning are ready to put our tools and experience to work for your Keller home or business. Let’s make your system stronger, smarter, and built to last.
Testimonials
#tacla100005e
- D.T.M. Heating and Air Conditioning
- (817) 386-5471
- Fort Worth, TX 76179